147AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettings2 ResolutionSet the output resolution.You can set “Resolution” separately for HDMI output of the analogvideo input and HDMI input.Auto (Default) : The number of pixels the TV connected to the HDMIMONITOR OUT connector supports is detectedautomatically and the appropriate output resolution isset.480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K :Set the output resolution.%• When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both theanalog video input signal and HDMI input signal can be set.• When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources(in 24 Hz). For video sources and mixed sources, we recommend setting theresolution to “1080p”.• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at aresolution of 1080p/50Hz.2 Progressive ModeSet an appropriate progressive conversion mode for the source videosignal.Auto (Default) : The video signal is automatically detected and theappropriate mode is set.Video : Select mode suitable for video playback.Video and Film : Select mode suitable for video and 30-frame filmmaterial playback.%• This item can be set when “i/p Scaler” is set to anything other than “Off”.2 Aspect RatioSet the aspect ratio for the video signals output to the HDMI.16:9 (Default) : Output at 16:9 aspect ratio.4:3 : Output at 4:3 aspect ratio with black bars on the sides of a 16:9 TVscreen (except for 480p/576p output).%• “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than“Off”.
