148AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsOn Screen DisplaySelect the on-screen display user interface preferences.2 VolumeSets where to display the master volume level.Bottom (Default) : Display at the bottom.Top : Display at the top.Off : Turn display off.%• When the master volume display is hard to see when superimposed text(closed captioning) or movie subtitles are present, set to “Top”.2 InfoDisplays status of operation temporarily when the sound mode ischanged, or input source is switched. You can set whether or not toshow each of these status displays.On (Default) : Turn display on.Off : Turn display off.2 Now PlayingSets how long each menu is displayed when the input source is“NETWORK”, “iPod/USB”, or “TUNER”.Always On (Default) : Show display continuously.Auto Off : Show display for 30 seconds after operation.TV FormatSet the video signal format to be output for the TV you are using.2 FormatNTSC (Default) : Select NTSC output.PAL : Select PAL output.%• “Format” can also be set by the following procedure. However, the menuscreen is not displayed.1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3seconds.“V.Format:” appears on the display.2. Use the main unit’s TUNER PRESET CH +, – and set the video signal format.3. Press the main unit’s STATUS to complete the setting.NOTE• When a format other than the video format of the connected TV is set, thepicture will not be displayed properly.
