142AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsGraphic EQUse the 9 band graphic equalizer to adjust the tone of each speaker.%• “Graphic EQ” can be set when “MultEQ® XT” (vpage 139) setting is “GraphicEQ”.• Speakers for which “Graphic EQ” can be set differ according to the sound mode.2 Speaker SelectionSelect whether to adjust tones for individual speakers or for allspeakers.AllLeft/Right (Default)Each2 Adjust EQAdjust tonal balance for each frequency band. Adjust the speakerselected in “Speaker Selection”.q Select the speaker.w Select the adjustment frequency band.63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHze Adjust the level.–20.0dB – +6.0dB (Default : 0.0dB)2 Curve CopyCopy “Audyssey Flat” curve from “MultEQ® XT” (vpage 139).%• “Curve Copy” is displayed after Audyssey® Setup has been performed.2 Set DefaultsThe “Graphic EQ” settings are returned to the default settings.
