172AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsLanguageSet the language for display on the menu screen.English (Default) / Français / Español%• “Language” can also be set by the following procedure. However, the menuscreen is not displayed.Following the display content to make the setting.1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3seconds.“V.Format:” appears on the display.2. Press the main unit’s DIMMER.“Lang.:” appears on the display.3. Use the main unit’s TUNER PRESET CH +, – and set the language.4. Press the main unit’s STATUS to complete the setting.GeneralMake various other settings.ZONE2 SetupSet the audio to play back with multi-zone (ZONE2).%• The setting values (dB) for “Volume Limit” and “Power On Volume” are what isdisplayed when “Scale” (vpage 138) in the menu is set to “–79.5dB – 18.0dB”.2 BassAdjust bass tones.–10dB – +10dB (Default : 0dB)2 TrebleAdjust treble tones.–10dB – +10dB (Default : 0dB)2 High Pass FilterMake settings for cutting the low range to reduce distortion in the bass.On : The low range is attenuated.Off (Default) : The low range is not attenuated.
