56AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackListening to FM/AM broadcasts1 Press TUNER to switch the input source to “TUNER”.GTV ScreenHTUNE+/-STEREO AUTOCH / OPTIONTUNERFM 92.10MHzNow PlayingTune Preset OptionCH 1GDisplay of this unitH01 FM 92.10MHz2 Press OPTION.The option menu screen is displayed.3 Use ui to select “FM/AM”, then press ENTER.4 Use o p to select “FM” or “AM”, then press ENTER.FM : When listening to an FM broadcast.AM : When listening to an AM broadcast.5 Press TUNE + or TUNE – to select the station you wantto hear.Scanning is performed until it finds an available radio station. Whenit finds a radio station, it stops the scan automatically and tunes in.%• The modes for receiving FM broadcasts consists of “Auto” mode that automaticallysearches available broadcast stations and “Manual” mode that lets you tune inusing buttons to change the frequency. The default setting is “Auto”. You can alsouse “Direct Tune” to tune in by entering the frequency directly.In “Auto” mode, you cannot tune in to radio stations if the reception is not good. Ifthis is the case, then use the “Manual” mode or “Direct Tune” to tune in.Operation buttons FunctionTUNE +, – Tuning (up/down)CH/PAGE df Preset channel selectionFAVORITE STATION1 – 3Call up favorite stations(Press and hold)Add to the favorite stations
