134AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsSurround ParameterYou can adjust the surround audio sound field effects to match yourpreferences.The items (parameters) that can be adjusted depend on the signalbeing input and the currently set sound mode. For details on theadjustable parameters, see “Sound modes and surround parameters”(vpage 207).%• Some setting items cannot be set while playback is stopped. Make the settingsduring playback.2 Cinema EQGently softens the upper treble range of movie soundtracks to reducepossible harshness and improve clarity.On : “Cinema EQ” is used.Off (Default) : “Cinema EQ” is not used.2 Loudness ManagementThis sets whether to output as specified in “Dynamic Compression”or output directly without compressing the dynamic range of audiorecorded in the disc.On (Default) : Outputs using the settings made in “DynamicCompression” and “Dialogue normalization function”(vpage 175) are enabled.Off : “Dynamic Compression” settings and “Dialogue Normalization”are disabled, and the signals on the disk are output as is.%• This can be set in the Dolby TrueHD mode.2 Dynamic CompressionCompress dynamic range (difference between loud and soft sounds).Auto (Default) : Automatic dynamic range compression on/off controlaccording to source.Low / Medium / High : These set the compression level.Off : Dynamic range compression is always off.%• You can set “Auto” only for the Dolby TrueHD source.
