Denon DN-S3500 Operating Instructions Manual

Also see for DN-S3500: Service manual

Contents

10ENGLISHENGLISH9 B TRIMPARAMETERPP SPUSH ON/OFFB TRIMCLRT.TTTETOECHO/LOOPREV.VV PITCH/V// OL. RELOOPEXIT/MODEFILE SEARCHB TRIMA2 BRELAYAACONT.TTe w, rqr q1Seamless Loop:q When the B TRIM button ispressed during seamlessloop playback, the B TRIMmode is turned on.To cancel B TRIM mode,press the B TRIM button again.Sampler Loop:q When the PITCH/VOL.button is pressed for morethan 0.5 sec during SamplerLoop playback, the B TRIMmode is turned on.32• The Seamless Loop and Sampler B points can be fine-adjusted using the Scratch Disc.• Trim the points during loop playback as a rehearsal.B Trim4B TRIMB TRIMPITCH/VOL.Select B pointw The A button illuminationautomatically flashes for thelast loop created oraccessed.• Press button A1 or A2.The loop whose B point is to be adjusted isselected.A1Trim B pointe Turn Scratch Disc slowly tomove the B point 1 frameat a time.• Range for trimming B point is limited asfollows.B point for Loop:Between 5 frames after A point anddisc end.B point for Sampler:Between 5 frames after A point andSampler end.*MP3Between 5 frames after A point and fileend.Save the B pointr Push the A or SAMP buttonagain to save new B point,and the unit automaticallyexits from the B Trim mode.A16Stutter• A1 and A2 points can be also used forStutter playback.t To enable stutter playback,push FLIP button for A1/A2buttons, then “ ” displayturns off.Press the FLIP button toswitch between the HotStart/Seamless Loop and Stutter modes.7Clear the A1/A2 pointy While pressing the FLIP/(CLR) button, pushthe A1 or A2 button to clear thecorresponding A and B points.Or push the FLIP button for more than 1sec to clear both A1 and A2 points at once.Quickly pressing the “FLIP” button firstand then A1, A2 or B buttons will clearthese points individually.CLRFLIPA1CLRFLIP