Denon DN-S3500 Operating Instructions Manual

Also see for DN-S3500: Service manual

Contents

12ENGLISHENGLISH11AUTO BPM COUNTERT.TTTETOECHO/LOOPFLANGERREV.VV PITCH/V// OL.q, w, e, tPARAMETERPP SPUSH ON/OFFFF HRELOOPEXIT/MODEFILE SEARCHB TRIMRELAYAACONT.TTr1BPM LOCKThe data measured by theauto BPM counter is locked.q Push the TAP button oncewhile auto BPM counter isoperating.“BPM Lock” is displayed for 1 second.32AUTO BPM COUNTERBeats per minute (BPM) of a track is measured automatically and displayed during playback or in Cuestandby mode.Measured BPM values are synchronized with the effector parameters such as:(ECHO/LOOP and FLANGERtime)• When Auto BPM COUNTER is off, pushing the TAP button for 1 second, reactivates the AUTO BPMCOUNTER to turn back on.• If you change or select a new track, the old BPM is cleared and the Auto BPM Counter starts to detectthe new track automatically.TAPTAPPINGThe interval when the TAP button is pushedrepeatedly is measured and BPM is calculated.w When you push the TAPbutton, the auto BPMcounter turns off.Push the TAP buttonrepeatedly about 5~10times according to thebeat.MANUAL INPUTThe known BPM can be dialed in directly by thenumerical value.e The BPM manual input mode is availablewhen the TAP button is pushed for morethan 2 sec. “Manual In” is displayed is thecharacter display.r You can input BPM valuedirectly with the EFFECTSknob.t When the TAP button ispushed again, the BPMmanual input mode issaved and the BPM islocked to that value forthat Track.NOTE:AUTO BPM COUNTER might not me able to be measured correctly according to the type of music.*If this happens, please use the TAP feature.TAPTAPAUTO BPM COUNTER/EFFECTORT.TT ETECHO/LOOPFLANGERFILTELL Rq, er, yu, ow, t, iPETORECO*2*4*6*1*3*51-1ECHO/LOOP ONq When the ECHO/LOOPbutton is pressed, theecho/loop function is turnedon.1 -31-2Set the parametersw The echo/loop parameters can be selectedwith EFFECTS knob and PARAMETERSknob.Echo Feedback number:Turn the EFFECTS knob.*1 The Echo Feedbacknumber is displayed inthe playback positionindicators.Echo Time:Turn the PARAMETERS knob.*2 The Echo time is displayed in thecharacter display.• When the EFFECTS knob is pressed, theparameter display is swited to the normaldisplay.• To return to the parameter display, pressor turn the EFFECTS knob.One of the 7 effects can be selected.ECHO/LOOPDRY WETEFFECTSECHO/LOOPSelect the LOOP modeWhen the feedback number is set to themaximum, loop playback with the specifiedtime begins. Other tracks can be selected orthe disc can be replaced for seamless play.ECHO LOOP FADE OUT• The parameter mode is turned off while theecho loop is playing when the back cue orNEXT TRACK is selected at the parameterselection mode.• When the new track is selected and playbackis started, echo loop playback stops by fadeout. An echo loop playback and a normalplayback can be smoothly replaced.• The disc can also be ejected during EchoLoop and replaced with a new disc withoutinterrupting the sound. Once a new track isselected and PLAY is pushed, the echo loopstarts to automatically fade out.EFFECTOR1 -4ECHO/LOOP OFFe If the ECHO/LOOP buttonis pressed again, theecho/loop function is turnedoff.ECHO/LOOPDRY WETEFFECTSTRACK SEARCHPARAMETERSPUSH ON/OFF• ECHO LOOP mode can be used in many ways foradvanced remixing. For example, during ECHO LOOPyou can shorten the original feedback time to chopthe beats in half each time the PARAMETERS knob isturned counter clockwise. Once the minimunfeedback time of 1/8 (or other) is reached, you canpush down the PARAMETERS knob to instantly returnback to the original ECHO LOOP sound. For evenmore creative control, the Pitch Slider and Key Adjustare functional with ECHO LOOP after it has been set.