Part NumberIssueDatePage61599388801301/20182 / 24901/2018 2 (249)Revision historyIssue Date Description Ref. firmwareversionMinimumDeltaQCversion01 04 January 2012 First issue 1.0x 2.0.x02 13 November2012General manual review, added Q54000statistic, DRT added for quality tests, testscheduling added, SIMAP-Box interfaceadded, Statistics and Settings updated1.1x 2.2.x03 02 May 2013Residual torque/angle automatic added(par. ), Quick test added for Delta 6D/7D(par. 8.1), Pset configuration updated (par.9), Curves viewer updated (par. 21),Statistics updated (par. 19), CVI3calibration added (par. 8.3.2),Maintenance updated (par. 22), Resultsvia Ethernet added, General manualreview1.3x 2.4.x04 02 August 2013 Angle peak added, manual barcodeinsertion added (par. 8.2.3) 1.4x 2.5.x05 23 January 2014 Results viewer updated (par. 20),Transducer ART added 1.5x 2.6.x06 20 October 2014Internal barcode scanner added (par. 3.5and 8.2.3), Production strategies added(par. 19), “Tightening” added into Demomode (par. 6.1.4), Customized analogtransducer added (par. 5), CVIC IIcalibration (par. 8.3.3)2.0x 3.0.x07 12 February 2015 Result view mode added (par. 20.1.1.8) 2.1x 3.1.x08 26 May 2015Introduction – About this documentupdated (par. 1.1), Torque / Angleparameters updated (par. 9.2), Loose andTightening updated (par. 15.4), CalculatingCorrection Coefficient for Extensionupdated (par. 22)2.2x 3.2.x09 12 October 2015General User Guide review, Transducersupdated (par. 5), Torque/Angle parametersupdated (par. 9.2), Joints Analysis updated(par. 16), Yield Point added (par. 16.1)2.3x 3.4.x10 31 May 2016General User Guide review, Specificationsupdated (par. 1.2), Software Installationupdated (par. 4.1), Creating a tool updated(par. 8.2.2), Starting a test by the barcodereader updated (par. 8.2.3.1), Psetupdated (par. 9), Main parameters andcontrol strategies updated (par. 9.1),Options updated (par. 9.6), Peak Test –Timeout updated (par. 12.2.1), ResultsViewer updated (par. 20)2.4x 3.5.x
