Part NumberIssueDatePage61599388801301/201899 / 24999 (249) 01/2018It is also possible to create (or modify) a Tool directly on the Delta. Hence, select MeasurementSetup → Tools setup from the main menu:Press the Enter button on the Delta keyboard to Modify/Delete the selected Tool (press Valid toconfirm), or to create a new one:Scroll the parameters using the Up/Down keys and click on Enter to edit the parameter selected.Then set the value by means of the arrow buttons (left/right to select the digit, up/down toincrease/decrease the value). Finally either click on Valid to save or click on Esc to quit withoutsaving.8.2.3 Executing the testOnce the Pset (and the Tool for Tool Testing) is created, it is possible to execute the test.Firstly, connect a transducer to the Delta.Then select Measurement → Production or Quality Audit or Tools menu, according to the testtype.Finally select the test to be started, as shown in the next figure:Select thePset to startThis screen isshown only fortool testing
