Dynex DX-19LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

10 Making connectionsDX-19LD150A11Using coaxial cable (good)To connect a cable or satellite box using coaxial cable:1 Turn off your TV/DVD combo and all connectedequipment.2 Connect the incoming cable from the cable wall jackto the cable-in jack on the cable or satellite box.3 Connect a coaxial cable (not provided) to theANT/CABLE IN jack on the back of your TV/DVDcombo and to the coaxial out jack on the cable orsatellite box.4 Turn on your TV/DVD combo, then turn on the cableor satellite box.5 Go through the setup wizard described on page 16.Connecting an antenna or cable TV (nobox)To connect an antenna or cable TV (no box):1 Turn off your TV/DVD combo and all connectedequipment.2 Connect a coaxial cable to the ANT/CABLE IN jackon the back of your TV/DVD combo and to theantenna or cable TV wall jack.3 Turn on your TV/DVD combo, then go through thesetup wizard described on page 16.Notes• Use a coaxial cable to eliminate interferenceand noise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.PBPRCable or satellite boxBack of TV/DVD comboCoaxial cableFrom cable TVwall jack (75 ohm)To Cable-in jack on thecable TV or satellite boxNotes• Use a coaxial cable to eliminate interferenceand noise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.• If the antenna is not installed correctly, contactqualified service personnel to correct theproblem.PBPRBack of TV/DVD comboCoaxial cable