Dynex DX-19LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

4 Installing the stand or wall-mount bracketDX-19LD150A11Installing the stand orwall-mount bracketInstalling the standTo install the stand:1 Carefully place your TV/DVD combo screenface-down on a cushioned, clean surface to protectthe screen from damage and scratches.2 Align the screw holes on the stand with the holes onthe bottom edge of the TV/DVD combo.3 Secure the stand to the TV/DVD combo with the twoscrews (provided).Installing a wall-mount bracketTo attach your TV/DVD combo to a wall-mount bracket:1 Carefully place your TV/DVD combo screenface-down on a cushioned, clean surface to protectthe screen from damage and scratches.2 Remove the two screws that secure the stand to theTV/DVD combo, then remove the stand.3 Attach the wall-mount bracket to your TV/DVDcombo using the mounting holes on the back ofyour TV/DVD combo. See the instructions that camewith the wall-mount bracket for information abouthow to correctly hang your TV/DVD combo.TV/DVD combo componentsPackage contents• AC power cord• Remote control and batteries (2 AAA)• Stand with screws• Component video cable• Audio cable• Quick Setup GuideFrontNotes• If you plan to wall-mount your TV/DVD combo,do not install the stand.• Store the stand and stand screws in case youdecide to use the stand in the future.WarningThis apparatus is intended to be supported by a ULListed wall mount bracket.NoteThe length of the wall-mount screws vary dependingon the wall-mount bracket you purchased. See theinstructions that came with the wall-mount bracketfor screw lengths.# Item DescriptionRemote sensor Receives the signals from the remotecontrol. Do not block.Power indicatorTurns on when your TV/DVD combo isturned on.Lights red when your TV/DVD combo is instandby mode.For more information, see “Turning yourTV/DVD combo on or off” on page 17.PC/DVIAUDIO INPBPR12