Dynex DX-19LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

22 Adjusting the pictureDX-19LD150A11• Overscan—This feature extends part of thedisplay past the visible area of the screen. Theresulting picture will “zoom in” on the imagecenter.• Color Temperature—Selects the colortemperature. You can select Cool (toenhance the blues), Normal, or Warm (toenhance the reds).• Noise Reduction—Selects the noisereduction mode to reduce picture noise(snow). You can select Low, Middle, High, orOff.• Adaptive Contrast—Automatically adjustspicture detail and brightness. You can selectOn or Off.• DCR—Enhances the contrast ratio betweenlight and dark areas of the picture. You canselect On or Off.• Reset Picture Settings—Resets all picturesettings to factory default.4 Press EXIT to close the menu.Setting power on vivid modeIf you select Retail Mode from the Setup Wizard to useyour TV/DVD combo for in-store display, you can set vividmode as your power on default, regardless of the picturemode you select when turning off the TV/DVD combo.To set power on vivid mode:1 Press MENU. The on-screen menu opens with thePicture menu displayed.2 Press or to highlight Settings. The Settingsmenu opens. Press or ENTER/ to access themenu.3 Press or to highlight Menu Settings, then pressENTER/ .4 Press or to highlight Power On In Vivid Mode,then press or to select On.5 Press EXIT to close the menu.Adjusting the computer imageTo adjust the computer image:1 Make sure that your TV/DVD combo is in VGA mode.For more information, see “Selecting the video inputsource” on page 17.2 Press MENU. The on-screen menu opens with thePicture menu displayed.3 Press or to highlight Settings. The Settingsmenu opens. Press or ENTER/ to access themenu.4 Press or to highlight VGA Settings, then pressENTER/ .5 The VGA Settings sub-menu opens. Press or tohighlight an option, then press or to adjust theoption.You can select:• Auto Adjust—Automatically adjusts the imagesettings such as position and phase.• H. Position—Moves the image right or left.• V. Position—Moves the image up or down.• Clock—Adjusts the sample frequency.• Phase—Adjusts the focus of stable images.6 Press EXIT to close the menu.NoteIf you select Home Mode from the Setup Wizard, youcannot set power on vivid mode.Picture Audio Settings ChannelSelect Move ReturnEnglish0LanguageTransparencyPower On In Vivid Mode OnNoteIf you select Off, the power on picture modedepends on your last selection.Open Source NoticeReset to Default