UPS Operating Instructions6-6 Eaton 93PM UPS (20–100 kW, 480V – 100 kW Frame) Installation and Operation Manual P-164000227—Rev 6 www.eaton.com/powerquality6.2.6 Display Menu OperationTable 6-3 describes the menu functions and how to use them.Table 6-3. Display Menu OperationFunction Subfunction OperationHome An overview of UPS operation, including information on load, efficiency and consumption.Meters – UPS The meter screens show the UPS meter readings for the unit. The default voltage displayed on thesescreens is phase-to-neutral. These can be changed to display the voltage phase-to-phase(A-B, B-C, C-A). Tap the METERS tab on the main menu navigation bar to display the METERSUMMARY screen (see Figure 6-5). The current UPS readings are displayed in the information area ofthe screen. To display individual meter details, tap the desired meter button to display the detailedmeter screen.Output – UPS The Output screen shows output voltage (phasetoneutral), output current (each phase), and frequencybeing supplied by the UPS, as well as the kVA, kW, and power factor measurements.Input – UPS The Input screen shows input voltage (phasetoneutral), input current (each phase), and frequency ofthe incoming utility source, as well as the kVA, kW, and power factor measurements.Bypass The Bypass screen shows the bypass input voltage (phasetoneutral), input current (each phase), andfrequency of the incoming utility source, as well as the kVA, kW, and power factor measurements.Battery – UPS The Battery screen displays the battery voltage (Vdc) and the battery current (Idc).Mimics UPS Mimic Tap the MIMICS tab on the main menu navigation bar to display an overview of UPS operation,including information on load, efficiency and consumption. If there is an error, an error indicator isdisplayed next to the affected part. Active events log can be opened by tapping the error indicator.UPS Module Map Tap the UPS MODULE MAP tab on the secondary menu navigation bar to display the status of eachUPM.System Overview Tap the SYSTEM OVERVIEW tab on the secondary menu navigation bar to display the status andmeters summary for each UPS.ESS Tap the ESS tab on the secondary menu navigation bar to display the approximate consumption andenergy savings of ESS mode.Logs Active Tap the LOGS tab on the main menu navigation bar to display the ACTIVE EVENTS screen (seeFigure 6-6). A listing of all system events that are currently active is displayed. The most recent eventis listed first. As events clear, they are removed from the Events listing. To scroll through the events,press the up or down scroll bar.System Log (Historical) Tap the SYSTEM LOG tab on the secondary menu navigation bar to display the SYSTEM LOG screen(see Figure 6-7). The history Log lists up to 512 events in chronological order, with the most recentevent listed last (once 512 is reached, the earliest event is overwritten). The end of the log (the mostrecent events) is displayed first; scroll upward to view older event listings. To scroll through theevents, press the up or down scroll bar.Settings Configurable system settings. Tap the SETTINGS tab on the main menu navigation bar to display thesettings screen. Settings may be password restricted. Settings Level 2 default password is 0101.User Tap the USER tab on the secondary menu navigation bar to display the USER screen (see Figure 6-8).Tap the INFORMATION or ABOUT button to display system information (see Figure 6-9 andFigure 6-10).Configuration Tap the CONFIGURATION tab on the secondary menu navigation bar to display the screen. Tap thefunction to be changed. Make and save the changes. Follow screen prompts to accept or abortchanges. For additional functions, tap the 2 button. See Figure 6-11 and Figure 6-12 for configurationscreens.Statistics Statistics Summary Tap the STATISTICS tab on the main menu navigation bar to display a summary of UPS statistics (seeFigure 6-13).Statistics Details Tap the desired statistic button to display the detailed statistic screen.Controls See paragraph 6.2.8 for details.
