Product Specifications9-2 Eaton 93PM UPS (20–100 kW, 480V – 100 kW Frame) Installation and Operation Manual P-164000227—Rev 6 www.eaton.com/powerquality9.2.2 UPS Output9.2.3 UPS EnvironmentalUPS Output Capacity 100% rated currentOutput Voltage Regulation ± 1% (10% to 100% load)Output Voltage 480 Vac Wye, 3W + ground. No Neutral.Output Voltage Harmonic Content 1% maximum THD (linear load)5% maximum THD (nonlinear load)Output Current See Table 3-4 or Table 3-5Output Voltage Balance < 2% for 100% maximum load imbalance (linear load)Output Voltage PhaseDisplacement< 2.5 for 100% maximum load imbalance (linear load)Frequency Regulation 0.1 Hz free runningSynchronous to Bypass ± 4 Hz (default setting)Frequency Slew Rate 1 Hz per second (default setting)Load Compatibility 0.8 pF Leading0.8 pF LaggingOverload Capability <110% for 10 minutes<125% for 60 seconds<150% for 10 seconds>150% for 300 millisecondsOperating Temperature 5 to 40C (41 to 104F) without derating. The recommended operatingtemperature is 25C (77F).Operating Altitude Maximum 1500m (5000 ft) at 40C without deratingStorage Temperature 25 to +55C, excluding batteries (prolonged storage above 40C causesrapid battery self-discharge)Relative Humidity (operating andstorage)95%, noncondensingAcoustical Noise 100 kW at 100% load – 65 dBA at a 1m distance, per ISO 7779Agency Markings UL 924 Auxiliary Lighting and Power EquipmentSafety: UL1778 4th Ed./CSA22.2 No. 107.3 2nd Ed.EMI Emissions and Immunity Meets IEC 62040-2 C3 and FCC Part 15 Subpart B, ICES-003, CISPR 22, VCCI:Class A, and CISPR 24.Electrostatic Discharge (ESD)ImmunityMeets IEC 61000-4-2 Level 3specifications. Withstands up to 4 kV contactpulse without damage and with no disturbance or adverse effect to thecritical load.
