IntroductionEaton 93PM UPS (20–100 kW, 480V – 100 kW Frame) Installation and Operation Manual P-164000227—Rev 6 www.eaton.com/powerquality 1-71.5 Using This ManualThis manual describes how to install and operate the Eaton 93PM 20–100 kW. Read and understand theprocedures described in this manual to ensure trouble-free installation and operation. In particular, bethoroughly familiar with the REPO procedure (see paragraph 6.3.16 or 6.4.18) or the LOAD OFF procedure (seeparagraph 6.3.15 or 6.4.17).The information in this manual is divided into sections and chapters. The system, options, and accessoriesbeing installed dictate which parts of this manual should be read. At a minimum, Chapters 1 through 4and Chapter 6 should be examined.Read through each procedure before beginning the procedure. Perform only those procedures that apply to theUPS system being installed or operated.1.6 Conventions Used in This ManualThis manual uses these type conventions:l Bold type highlights important concepts in discussions, key terms in procedures, and menu options, orrepresents a command or option that you type or enter at a prompt.l Italic type highlights notes and new terms where they are defined.l Screen type represents information that appears on the screen or LCD.In this manual, the term UPS refers only to the UPS cabinet and its internal elements. The term UPS systemrefers to the entire power protection system – the UPS cabinet, an external battery system, and options oraccessories installed.The term line-up-and-match refers to accessory cabinets that are physically located adjacent to the UPS. Theterm standalone refers to accessory cabinets that are located separate from the UPS.Left and right side notations are referenced standing in front of the cabinet.Icon DescriptionNote Information notes call attention to important features or instructions.[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
