Eaton CEAG DualGuard-S Mounting And Operating Instructions

Contents

69Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de31 CG V.1 Relay Module31 CG V.1 Relay ModuleThe CGV.1 relay module is suitable for snap mounting onthe DualGuard-S module subrack and enables the connec-tion of the DualGuard-S to a central control station (FÜB).The most important system statuses are reported viapotential-free signalling contacts. Two input channels areavailable for remote checking of the DualGuard-S centralbattery system. A function test can be triggered via the„FT“ input channel and an duration test (battery test) viathe „BT“ input channel. Eight LEDs indicate the systemstatus.Switching capacity of the contacts: 24V/0,5A AC/DC24V Function inputsWith a pulse of at least 20 ms/24 V the desired functioncan be activated.If a function or duration test is to be triggered again, thefunction-duration test must be reset via a pulse.Function test ON => 24V DC ≥ 20msFunction test OFF => 24V DC ≥ 20msBattery duration test ON => 24V DC ≥ 20msBattery duration test OFF => 24V DC ≥ 20msOrdering detailsType Description Order No.CG V.1 Relay module for subrack Mounting 40071361630Function Contact11/12Contact21/22Contact31/32Contact41/42Contact51/52Not ready for operation ON - - - -Disfunction Prior. 1 - ON - - -Disfunction Prior. 2 - - ON - -Disfunction Prior. 3 - - - ON -Emergency mode - - - - ON