Eaton HFX Series Installation And Operation Manual

EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 2019147.0 SOFTWARE DESCRIPTIONSoftware for the HFX family of controllers isprovided in the form of the HFX Platform SupportPackage. This is distributed as a .package file(C:\Users\Public\Pro-FX) and containsthe following elements:• Firmware files (MOT files): A separate file isprovided for each HFX controller model.• Device description package for Pro-FX Control:The HFX package file can be installed using thePro-FX Control Package Manager. Once it isinstalled, any of the HFX devices can be usedwithin Pro-FX Control.• HFX Service Tool: Setup.exe in the Service Toolfolder is the installation file.• Gateway file: Gateway.cfg defines how Pro-FXControl connects to the HFX device.• HFX USB Driver: Pro-FX Control connects to theHFX using USB. This is the driver to support thatconnection.• ECOM USB Driver: The Pro-FX Configure HFXService Tool connects to the HFX over CANPort 1 at 250k, using the ECOM device. This isthe driver for that device.When updating an existing HFX Support Package,it is necessary to update each of the aboveelements except for the USB drivers, which do notneed to be updated unless explicitly mentionedin a given release.8.0 SERVICE TOOL - INSTALLATION ANDGETTING STARTED8.1 Installation Procedure8.1.1 Launch the ProFXConfigure_v2.3.0.exe8.1.2 Click Next from the Welcome screen8.1.3 Agree to the software license and click Next8.1.4 Choose Complete or Custom installation,then click Next8.1.4.1 If Custom is shown, pick which options you'd likeinstalled then click NextHFX Product Family