EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 201919HFX Product Family12.5 Controller MemoryThe controller utilizes an advanced superscalar32 Bit processor operating at 200 MHz. The memoryis arranged into the following areas:• Flash 3.75 Mbyte (1.75 Mbyte reserved for IECapplication)• EEPROM 128 kbyte reserved for internal use i.e.firmware/bootloader• RAM 256 kbyte• MRAM 32 kbyte (24 kbyte user accessiblefile-system + 4kbyte redundant retain)12.6 Calibration parameter memoryThe Pro-FX Control development Environment offersthe ability to have local calibration parameters throughthe use of the parameter handler included in thePro-FX Control standard project in the HFX templates.For further information on how to use the Parameterhandler please review the information on theparameter handler in the Pro-FX Control help system.12.7 LED OperationLED A (left-most) - Green power LED• Off ==> Not powered up• Solid on ==> Powered up and Pro-FX Controlapplication not running• Fast flash (100ms on, 100ms off) ==> Pro-FXControl application runningLED B (middle) - Red MIL (Malfunction Indicator Lamp)• Pro-FX Control application running• Flashing (200ms on, 200ms off) ==> critical fault is active• Solid on ==> standard fault is active• Off ==> no fault• Pro-FX Control application not running• Fast Flashing (200ms on, 200ms off) ==> critical fault is active• Slow pulse (100ms on, 1500ms off) ==> historic fault is set- must be manually cleared• Solid on ==> standard fault is active• Off ==> no faultLED C (right-most) - Green user programmable LED• User programmable via System Config I/O variable:userLedStateMiscellaneous states• LED A Off and MIL light solid on ==> Nofirmware present• MIL light will pulse briefly for a bulb check onevery powerup• MIL light will retain its state for 3 seconds afteran active fault goes inactive13.0 INSTALLING THE CONTROLLER13.1 Product DimensionsHFX32m & HFX48m Dimensional Data4X .2566.504.654118.227.743196.675.282134.178.371212.612X 2.30558.554X .3799.613124X .3799.612.30558.55