Eaton HFX Series Installation And Operation Manual

EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 20191610.0 PRO-FX CONTROL10.1 Install Pro-FX Control10.1.1 Install Pro-FX Control if it is not already installed.10.2 Install the HFX Support Package10.2.1 Launch Pro-FX Control and select Tools->PackageManager.Note: That it is necessary to run Pro-FX Control withAdministrator privileges to complete this step.10.2.2 Click the "Install..." button.10.2.3 Highlight the HFX Support package file andselect open.10.2.4 Follow the prompts to finish the installation. Closethe Package Manager.11.0 GETTING STARTED11.1 Create your First Project11.1.1 Click File->New Project.11.1.2 Select "Standard Pro-FX Project". Click "OK".11.1.3 Select the appropriate HFX device and I/O countfor the controller you will be using for your project.Click OK.11.2 Connect and Program your Controller11.2.1 Connect the HFX controller to the USB port of yourcomputer via the 6-pin Deutsch connector.11.2.2 Ensure that the unit is powered-up properly byverifying that LED A is green.11.2.3 In the Pro-FX Control "Devices" tree view,double click on the "Device".11.2.4 Click on the "Communication Settings" tab.11.2.5 Click on the "Gateway-1" and then click "ScanNetwork".11.2.6 One HFX should appear. Click on it and select "Setactive Path". If you have problems with this step,please see the troubleshooting steps in Appendix A.11.2.7 Select "Online->Login" and then acknowledge anyprompts that are displayed.11.2.8 Click "Debug->Start".11.2.9 You have now programmed an empty project to yourHFX controller and are connected for the first time.LED A should be flashing on your controller whichindicates that there is an application currently runningon your controller.HFX Product Family