Menvier30/40/100/300 4. AdministrationPage 99output available.13. Press .The keypad gives a double“beep” confirmation tone. Thebottom line of the display showsthe first in a list of three actionsthat you can give to the button:“On” = Turns the output on.“Off” = Turns the output off.“Toggle” = Changes the state ofthe output every time you pressthe button.14. Press or . until the displayshows the action you want to giveto the button, for example: 15. Press .The keypad gives a double“beep” confirmation tone. Thekeypad display shows: 16. Press twice.Repeat steps 8 to 15 if you wantto program any more remotes.17. Press repeatedly to leave themenu.Deleting Remote ControlsIf a user has lost a remote control you should delete it from the system tomake sure that no unauthorised person can use it to gain access. Also, ifyou wish to reassign a device to another user, you must first delete it fromthe system.To delete a single remote:1. Make sure the display shows thestandby screen.2. Press . 3. Key in your access code (orpresent a tag).
