Eaton Menvier 20 Administrator's And User Manual

Contents

Menvier30/40/100/300 4. AdministrationPage 1039. Press .The display shows: 10. Press . or  until the displayshows: 11. Press The keypad gives a double “beep”confirmation tone. The keypaddisplay shows: 12. Press  repeatedly to leave themenu.Once you have carried out this process, then although remote controls canset the system, none of them can unset the system. To allow remotecontrols to unset the system repeat steps 1 to 12, but select “enabled” atstep 10.Allowing a FOB-2W-4B or 727r to start a HUAYou may wish to allow a user to start a Hold Up Alarm from a 727r remotecontrol or a FOB-2W-4B two-way fob. The Installer must first program thecontrol unit to allow this (note that doing so will mean that the system nolonger complies with BS8243 or DD243). Once the Installer has enabledthe feature, you can enable the remote control or FOB-2W-4B as follows:1. Make sure the display shows thestandby screen.2. Press . 3. Key in your access code (orpresent a tag). 4. Press  until you see:. 5. Press . 6. Press  until the display shows: 7. Press . 