Eaton Menvier 20 Administrator's And User Manual

Contents

4. Administration Menvier30/40/100/300Page 76of March will be 01/03/2010.9. Press .The top line of the display shows“Set the Time” and the bottom lineof the display shows the currentsystem time. The minutes arehighlighted.10. Key in the correct time. Use the 24-hour clock in the format hh/mm. Ifthe hours or minutes are “9” or lessthen key in a leading zero. Forexample: six minutes past seven inthe morning will be “07:06”.11. Press .The keypad gives a double “beep”confirmation tone. The keypaddisplay shows:The control unit has saved yourchanges and returned the displayto the date and time menu option.Note: The internal clock adjusts itself for daylight saving in Spring andAutumn.Calendar SetNot available on the Menvier30.Using the calendar set option you can program the control unit to set orunset the alarm system (or parts of it) at fixed times of day on a seven daycycle. If the system is set up as a part setting system then you can use thisoption to Full Set, Unset or Part Set-B, -C or -D the system. If the system isset up as a Ward based system then this option allows you to Full Set,Unset or Part Set any collection of wards.There are two basic elements that you can program within the calendar setoption: the “event” and the “exception”.Each event specifies:A 12 character name as a reminder of the purpose of the event.A time on the 24 hour clock