CHAPTER 4: INTERFACES FRONT PANEL INTERFACEF60 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL 4-354Figure 4-42: Annunciator alarm sequence in Acknowledgeable modeTo acknowledge/reset all annunciator windows on a page:1. On the graphical front panel, press the RESET pushbutton with none of the annunciator windows selected. Theflashing stops.To acknowledge/reset a specific annunciator window:1. On the graphical front panel, press the Up, Down, Left, and Right pushbuttons to select the window, so that is has ayellow outline. Press the RESET or ENTER pushbutton. While a window is selected, if that window has activated sincethe last restart, the date/time of the last activation of that window displays in the header.The alarm remains in an alarm state (for example, displays red) when the condition remains. That is, if youacknowledged the alarm but the alarm condition remains, the background color remains red.The SETTINGS > INPUTS/OUTPUTS > RESETTING > RESET ANNUNCIATOR setting can be used to select a FlexLogicoperand that when activated acknowledges/resets all annunciator windows.Annunciator editorThe annunciator editor is used to configure alarms and actual value displays for the graphical front panel.The path in the EnerVista software is Settings > Product Setup > Graphical Panel > Annunciator Editor.The figure shows the annunciator editor and its preview window. The page name is entered as General at the top right.Acknowledgeable and self-resetting alarms are set for basic functions, such as online/offline, Ethernet ports, unauthorizedaccess/failed logins, and battery failure. The text to display in the annunciator window is entered. The IN SERVICE LED is setto be green because when the device is on, this LED is green. The preview shows what the annunciator looks like with allalarms triggered. The last window is not configured and displays blank/grey. In order for the Ethernet and battery alarmsto work, the corresponding self-test alarms have been enabled under Settings > Product Setup > User-ProgrammableSelf Tests (not shown).
