GE TWIN FLEX PT9200 Owner's Manual
Also see for TWIN FLEX PT9200: Installation guideOwner's manual
                                                        | |
Contents
|
49-80786-1 21Lower Oven Door7KHORZHUGRRULVYHU\KHDY\%HFDUHIXOZKHQUHPRYLQJDQGOLIWLQJWKHGRRU'RQRWOLIWWKHGRRUE\WKHKDQGOHTo remove the door:1. Fully open the door.2. Pull the hinge locks down toward the door frame,to the unlocked position. A tool, such as a smallflat-blade screwdriver, may be required.3. Firmly grasp both sides of the door at the top.4. Close door to the door removal position. The doorshould be open approximately 3" with no obstructionabove the door. /LIWGRRUXSDQGRXWXQWLOERWKKLQJHDUPVDUHFOHDURIthe slots.To replace the door:1. Firmly grasp both sides of the door at the top.2. Starting on the left side, with the door at the sameangle as the removal position, seat the indentation ofthe hinge arm into the bottom edge of the hinge slot.The notch in the hinge arm must be fully seated intothe bottom of the slot. Repeat for right side. )XOO\RSHQWKHGRRU,IWKHGRRUZLOOQRWIXOO\RSHQWKHindentation is not seated correctly in the bottom edgeof the slot.4. Push the hinge locks up against the front frame of theoven cavity, to the locked position.5. Close the oven door.Upper Oven Door7KHXSSHUGRRUFRQWDLQVPDQ\RIWKHHOHFWURQLFVDQGFRQWUROVIRUWKHRYHQ,WLVUHFRPPHQGHGWKDWWKHXSSHUGRRUEHremoved only by a trained service technician.Removal positionHinge lockSlotPull hinge locks down to unlockPush hinge locks up to lockHingelockHingearm,QGHQWDWLRQ%RWWRPedge ofslotHinge armCARE AND CLEANING: 2YHQ 'RRUOven Door |
Related manuals for GE TWIN FLEX PT9200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine