Chapter 5. Measurements100 TransPort ® PT900 User’s Manual5.3.4 Displaying the Diagnostics ParametersDuring operation, the PT900 measures various system parameters for the purposeof analyzing the system performance. These system diagnostic parameters arelisted in the DIAGNOSTICS measurement screen (see Figure 97 below). To accessthis screen, click the icon at the top of the measurement screen.After you have finished viewing the diagnostic parameters, click the appropriateicon at the top of the screen to return to the measurement display.Note: In the screen below, Channel 1 is active and Channel 2 is inactive. Also,all the signal diagnostic parameters are within their normal range, asindicated by the green check marks to the right of each parameter.Figure 97: Diagnostics Measurement ScreenClick Here