Chapter 8. Error Codes and Troubleshooting140 TransPort ® PT900 User’s Manual8.6 The Quick-Start GuideThe Quick Start Guide, which can be found on your SD card, provides generalinstructions on using the flow meter and the APP. Start by watching the installationvideos on GE web site at www.gemeasurement.com/pt900, and then complete thefollowing steps:1. Check the PT900 transmitter and the tablet before use.2. Load the APP onto tablet from either the SD card or from our web site (seethe link above).3. Turn on the transmitter by holding down the power button for more thantwo seconds. The green power LED indicates that the power is On.4. Open the PT900 APP on the Tablet.5. Connect the APP to the transmitter via Bluetooth communication.6. Select the desired Measurement Units option and program the meter withcorrect pipe, fluid, transducer and placement information.7. Install the transducers onto the pipe with the Spacing informationcalculated by the APP.8. Set the tablet display to the desired values and to view the flow rate.9. Continue with other operations, as described elsewhere in this manual.
