Chapter 2. Installation14 TransPort ® PT900 User’s Manual2.5.3 Mounting the Clamp-On Fixture (cont.)7. Repeat the previous steps to install the chain at the opposite end of theclamp-on fixture (see Figure 14 below). The clamp-on fixture should befirmly mounted to the pipe, but it should still be loose enough to allowfinal alignment.Figure 14: Fixture With Chains Installed8. Rotate the fixture to the 3 o’clock or 9 o’clock position on the pipe (seeFigure 15 below). Installation on the top or bottom of the pipe is notrecommended. Make sure the pipe still rests in the cutout slot on thebottom of both end pieces, to ensure that the fixture is parallel to the pipecenterline.Figure 15: Fixture Rotated to Horizontal Position
