Garmin G3X Pilot’s Guide 190-01115-00 Rev. J162Flight PlanningSystemOverviewFlightInstrumentsEISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilotAnnun/AlertsAppendixIndexMANUALLY SWITCHING BETWEEN INTERNAL ANDEXTERNAL FLIGHT PLAN SOURCESNOTE: The selection of the internal GPS navigation source to persist throughpower cycles or reset to the external GPS navigation source is dependant onthe configuration. Refer to the G3X Installation Manual for more information.Press the INTERNAL Softkey on the Active Flight Plan Page or the Direct-to Page, totemporarily allow flight planning through the G3X using the internal GPS flight planwhen an external GPS Navigator is configured. Press the EXTERNAL Softkey to returnto the external GPS navigator’s flight plan.When manually selecting the internal GPS flight plan, ‘INT’ is displayed in light bluein the upper left corner of the Data Bar as well as the lower left quadrant of the HSI.Internal Flight Plan IndicationUsing InternalGPS Flight PlanINT: The pilot haselected to use theinternal GPS naviga-tion source insteadof the external GPSnavigation source.
