1026Field DescriptionTop victims Top ten attack statistics by victim.Top attack types Attack statistics by attack type.Related commandsattack-defense top-attack-statistics enabledisplay blacklist ipUse display blacklist ip to display IPv4 blacklist entries.SyntaxCentralized devices in standalone mode:display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peerds-lite-peer-address ] ] [ count ]Distributed devices in standalone mode/centralized devices in IRF mode:display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peerds-lite-peer-address ] ] [ slot slot-number ] [ count ]Distributed devices in IRF mode:display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] [ ds-lite-peerds-lite-peer-address ] ] [ chassis chassis-number slot slot-number ] [ count ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParameterssource-ip-address: Specifies the IPv4 address for a blacklist entry.vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 addressbelongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do notspecify this option if the IPv4 address is on the public network.ds-lite-peer ds-lite-peer-address: Specifies the IPv6 address of the B4 element of the DS-Lite tunnelthat transmits packets from the blacklisted IPv4 address.slot slot-number: Specifies a card by its slot number. If you do not specify a card, this commanddisplays IPv4 blacklist entries for all cards. (Distributed devices in standalone mode.)slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a memberdevice, this command displays IPv4 blacklist entries for all member devices. (Centralized devices inIRF mode.)chassis chassis-number slot slot-number: Specifies a card on an IRF member device. Thechassis-number argument represents the member ID of the IRF member device. The slot-numberargument represents the slot number of the card. If you do not specify a card, this command displaysIPv4 blacklist entries for all cards. (Distributed devices in IRF mode.)count: Displays the number of matching IPv4 blacklist entries.Usage guidelinesIf you do not specify any parameters, this command displays all IPv4 blacklist entries.
