922undo descriptionDefaultA connection limit policy does not have a description.ViewsIPv4 connection limit policy viewIPv6 connection limit policy viewPredefined user rolesnetwork-adminParameterstext: Specifies a description, a case-sensitive string of 1 to 127 characters.Usage guidelinesIf you execute this command multiple times, the most recent configuration takes effect.Examples# Configure the description as CenterToA for IPv4 connection limit policy 1. system-view[Sysname] connection-limit policy 1[Sysname-connlmt-policy-1] description CenterToARelated commandsdisplay connection-limitdisplay connection-limitUse display connection-limit to display information about connection limit policies.Syntaxdisplay connection-limit { ipv6-policy | policy } { policy-id | all }ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersipv6-policy: Specifies an IPv6 connection limit policy.policy: Specifies an IPv4 connection limit policy.policy-id: Specifies a connection limit policy by its ID. The value range for this argument is 1 to 32.all: Specifies all connection limit policies.Examples# Display information about all IPv4 connection limit policies. display connection-limit policy all3 policies in total:Policy Rule Stat Type HiThres LoThres Rate ACL--------------------------------------------------------------------------------
