121Parametersdata { byte | giga-byte | kilo-byte | mega-byte }: Specifies the unit for data flows, which can bebyte, kilobyte, megabyte, or gigabyte.packet { giga-packet | kilo-packet | mega-packet | one-packet }: Specifies the unit for datapackets, which can be one-packet, kilo-packet, mega-packet, or giga-packet.Usage guidelinesThe data flow and packet measurement units for traffic statistics must be the same as configured onthe HWTACACS accounting servers. Otherwise, accounting results might be incorrect.Examples# In HWTACACS scheme hwt1, set the data flow and packet measurement units for traffic statisticsto kilobyte and kilo-packet, respectively. system-view[Sysname] hwtacacs scheme hwt1[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packetRelated commandsdisplay hwtacacs schemedisplay hwtacacs schemeUse display hwtacacs scheme to display the configuration or statistics of HWTACACS schemes.Syntaxdisplay hwtacacs scheme [ hwtacacs-scheme-name [ statistics ] ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametershwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of1 to 32 characters. If you do not specify an HWTACACS scheme, this command displays theconfiguration of all HWTACACS schemes.statistics: Displays the HWTACACS service statistics. If you do not specify this keyword, thecommand displays the configuration of the HWTACACS scheme.Examples# Displays the configuration of all HWTACACS schemes. display hwtacacs schemeTotal 1 HWTACACS schemes------------------------------------------------------------------HWTACACS Scheme Name : hwtacIndex : 0Primary Auth Server:IP : 2.2.2.2 Port: 49 State: ActiveVPN Instance: 2
