946# Configure an IPv6 address object with the IPv6 address of 1:1:1::1 and prefix length of 24. system-view[Sysname] object-group ipv6 address ipv6group[Sysname-obj-grp-ipv6-ipv6group] network subnet 1:1:1::1 24# Configure an IPv6 address object with the address range of 1:1:1::1 to 1:1:1::100 system-view[Sysname] object-group ipv6 address ipv6group[Sysname-obj-grp-ipv6-ipv6group] network range 1:1:1::1 1:1:1::100# Configure an IPv6 address object using object group ipv6group2. system-view[Sysname] object-group ipv6 address ipv6group[Sysname-obj-grp-ipv6-ipv6group] network group-object ipv6group2network excludeUse network exclude to exclude an IPv4 or IPv6 address from an address object.Use undo network exclude to restore the default.Syntaxobject-id network exclude ipv4-address/ipv6-addressundo object-id network exclude ipv4-address/ipv6-addressDefaultNo IPv4 or IPv6 address in an address object is excluded.ViewsIPv4 address object group viewIPv6 address object group viewPredefined user rolesnetwork-adminParametersobject-id: Specifies an address object by its ID in the range of 1 to 4294967294. The specifiedaddress object must have been created.ipv4-address/ipv6-address: Specifies the IPv4 or IPv6 address to be excluded.Usage guidelinesThe following matrix shows the command and hardware compatibility:Hardware Command compatibilityMSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK YesMSR2600-10-X1 YesMSR 2630 YesMSR3600-28/3600-51 YesMSR3600-28-SI/3600-51-SI NoMSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC Yes
