1030 display blacklist ipv6 countSlot 1 in chassis 1:Totally 3 blacklist entries.Slot 2 in chassis 2:Totally 3 blacklist entries.Table 166 Command outputField DescriptionIPv6 address IPv6 address of the blacklist entry.VPN instanceMPLS L3VPN instance to which the blacklisted IPv6 address belongs. Ifthe blacklisted IPv6 address is on the public network, this field displayshyphens (--).Type Type of the IPv6 blacklist entry, Manual or Dynamic.TTL(sec) Remaining aging time of the IPv6 blacklist entry, in seconds. If no agingtime is set for the entry, this field displays Never.Dropped Number of dropped packets sourced from the IPv6 address.Totally 3 blacklist entries Total number of IPv6 blacklist entries.Related commandsblacklist ipv6display client-verify protected ipUse display client-verify protected ip to display protected IPv4 addresses for client verification.SyntaxCentralized devices in standalone mode:display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ portport-number ] [ count ]Distributed devices in standalone mode/centralized devices in IRF mode:display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ portport-number ] [ slot slot-number ] [ count ]Distributed devices in IRF mode:display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ portport-number ] [ chassis chassis-number slot slot-number ] [ count ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersdns: Specifies the DNS client verification feature.http: Specifies the HTTP client verification feature.tcp: Specifies the TCP client verification feature.
