330portal client-gateway interfaceUse portal client-gateway interface to specify the AC’s interface for portal clients to access duringthird-party authentication.Use undo portal client-gateway interface to restore the default.Syntaxportal client-gateway interface interface-type interface-numberundo portal client-gateway interfaceDefaultNo AC's interface is specified for portal clients to access during third-party authentication.ViewsSystem viewPredefined user rolesnetwork-adminParametersinterface-type interface-number: Specifies an interface by its type and number.Usage guidelinesWhen client traffic is forwarded by APs and third-party portal authentication is used, the client doesnot know the IP address of the AC. For the client to access AC successfully, specify an interface ofthe AC, so the client can obtain the AC's IP address and access the AC.Examples# Specify VLAN-interface 100 on the AC for clients to access during third-party authentication. system-view[Sysname] portal client-gateway interface vlan-interface 10portal client-traffic-report intervalUse portal client-traffic-report interval to set the interval at which an AP reports traffic statistics tothe device.Use undo portal client-traffic-report interval to restore the default.Syntaxportal client-traffic-report interval intervalundo portal client-traffic-report intervalDefaultAn AP reports traffic statistics to the device at an interval of 60 seconds.ViewsSystem viewPredefined user rolesnetwork-adminParametersinterval: Specifies the interval at which an AP reports traffic statistics to the device, in the range of 1to 3600 seconds.
