516display ipsec { ipv6-policy-template | policy-template }Use display ipsec { ipv6-policy-template | policy-template } to display information about IPsecpolicy templates.Syntaxdisplay ipsec { ipv6-policy-template | policy-template } [ template-name [ seq-number ] ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersipv6-policy-template: Displays information about IPv6 IPsec policy templates.policy-template: Displays information about IPv4 IPsec policy templates.template-name: Specifies an IPsec policy template by its name, a case-insensitive string of 1 to 63characters.seq-number: Specifies an IPsec policy template entry by its sequence number in the range of 1 to65535.Usage guidelinesIf you do not specify any parameters, this command displays information about all IPsec policytemplates.If you specify an IPsec policy template name and a sequence number, this command displaysinformation about the specified IPsec policy template entry. If you specify an IPsec policy templatename without any sequence number, this command displays information about all IPsec policytemplate entries with the specified name.Examples# Display information about all IPv4 IPsec policy templates. display ipsec policy-template-----------------------------------------------IPsec Policy Template: template--------------------------------------------------------------------------------Sequence number: 1---------------------------------Description: This is policy templateTraffic Flow Confidentiality: DisabledSecurity data flow :Selector mode: standardLocal address:IKE profile:IKEv2 profile:Remote address: 162.105.10.2Transform set: testpropIPsec SA local duration(time based): 3600 seconds
