1110Use undo arp source-mac threshold to restore the default.Syntaxarp source-mac threshold threshold-valueundo arp source-mac thresholdDefaultThe threshold for source MAC-based ARP attack detection is 30.ViewsSystem viewPredefined user rolesnetwork-adminParametersthreshold-value: Specifies the threshold for source MAC-based ARP attack detection. The valuerange for this argument is 1 to 5000.Examples# Set the threshold for source MAC-based ARP attack detection to 30. system-view[Sysname] arp source-mac threshold 30display arp source-macUse display arp source-mac to display ARP attack entries detected by source MAC-based ARPattack detection.SyntaxCentralized devices in standalone mode:display arp source-mac [ interface interface-type interface-number ]Distributed devices in standalone mode/centralized devices in IRF mode:display arp source-mac { slot slot-number | interface interface-type interface-number }Distributed devices in IRF mode:display arp source-mac { chassis chassis-number slot slot-number | interface interface-typeinterface-number }ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersinterface interface-type interface-number: Specifies an interface by its type and number.slot slot-number: Specifies a card by its slot number. If you do not specify a card, this commanddisplays ARP attack entries for the active MPU. (Distributed devices in standalone mode.)slot slot-number: Specifies an IRF member device by its ID. If you do not specify a member device,this command displays ARP attack entries for the master device. (Centralized devices in IRF mode.)
