104If you use both the nas-ip command and radius nas-ip command, the following guidelines apply:• The setting configured by the nas-ip command in RADIUS scheme view applies only to theRADIUS scheme.• The setting configured by the radius nas-ip command in system view applies to all RADIUSschemes.• The setting in RADIUS scheme view takes precedence over the setting in system view.You can specify a maximum of 16 source IP addresses, including the following IP addresses:• Zero or one public-network source IPv4 address.• Zero or one public-network source IPv6 address.• Private-network source IP addresses.Each VPN instance can have a maximum of one private-network source IPv4 address and oneprivate-network source IPv6 address.Examples# Specify IP address 129.10.10.1 as the source address for outgoing RADIUS packets. system-view[Sysname] radius nas-ip 129.10.10.1Related commandsnas-ip (RADIUS scheme view)radius schemeUse radius scheme to create a RADIUS scheme and enter its view, or enter the view of an existingRADIUS scheme.Use undo radius scheme to delete a RADIUS scheme.Syntaxradius scheme radius-scheme-nameundo radius scheme radius-scheme-nameDefaultNo RADIUS schemes exist.ViewsSystem viewPredefined user rolesnetwork-adminParametersradius-scheme-name: Specifies the RADIUS scheme name, a case-insensitive string of 1 to 32characters.Usage guidelinesA RADIUS scheme can be used by more than one ISP domain at the same time.The device supports a maximum of 16 RADIUS schemes.Examples# Create a RADIUS scheme named radius1 and enter RADIUS scheme view. system-view
