849Application Protocol Porttacacs-ds TCP 65UDP 65net-bios-dgm TCP 137, 138, 139UDP 137, 138, 139ftp TCP 21tftp UDP 69Table 128 Command outputField DescriptionApplication Application protocol using the port mapping.Protocol Transport layer protocol.Port Port number of the application protocol.Related commandsdisplay port-mappingport-mappingdisplay port-mapping user-definedUse display port-mapping user-defined to display information about the user-defined portmappings.Syntaxdisplay port-mapping user-defined [ application application-name | port port-number ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersapplication application-name: Specifies an application protocol by its name, a case-insensitivestring of 1 to 63 characters. The names invalid and other are not allowed.port port-number: Specifies a port by its number, in the range of 0 to 65535.Usage guidelinesIf you do not specify an application protocol or a port number, this command displays all user-definedport mappings on the device.Examples# Display all user-defined port mappings on the device. display port-mapping user-definedApplication Port Protocol Match Type Match Condition-------------------------------------------------------------FTP 21 TCP --- ---FTP 21 UDP IPv4 host 10.10.10.1(vpn1)FTP 2121 UDP IPv4 host [11.10.10.1, 11.10.10.10](vpn2)
