164Sampler configuration commandsdisplay samplerUse display sampler to view configuration and running information about a sampler.SyntaxIn standalone mode:display sampler [ sampler-name ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]In IRF mode:display sampler [ sampler-name ] [ chassis chassis-number slot slot-number ] [ | { begin | exclude |include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameterssampler-name: Specifies the sampler name, a case-insensitive string of 1 to 32 characters.slot slot-number: Displays the sampler configuration and running information of a specific card. Theslot-number argument specifies a card by its slot number. (In standalone mode)chassis chassis-number slot slot-number: Displays the sampler configuration and running information ofa card on a member of the IRF virtual device. The chassis-number argument refers to the ID of the IRFmember device, and the slot-number argument refers to the number of the slot where the card resides. (InIRF mode)|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# Display the configuration and running information for the specified sampler. display sampler 256 slot 1Sampler name: 256Index: 1, Mode: Fixed, Packet-interval: 8Table 49 Command outputField DescriptionSampler name Name of the sampler.
