31PTP configuration commandsOnly the S7508E-X switch that has LSQ1QGC4SC or LSQ1QGS4SC installed supports PTP.display ptpUse display ptp to display PTP statistics.Syntaxdisplay ptp [ brief | interface interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersbrief: Displays brief PTP statistics.interface interface-type interface-number: Displays detailed PTP statistics of the specified port. Theinterface-type interface-number argument specifies a port by its type and number. If no port is specified,the global PTP statistics are displayed.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# Display brief PTP statistics. display ptp briefPort infoName Role Delay-mech Clock-step Port-enable Asym-corrFGE1/0/1 Master P2P Two Enabled 0# Display global PTP statistics. display ptpDevice configuration information----------------------------------------------------------------PTP mode : OC Domain value : 0 Slave only : NoBMC run info----------------------------------------------------------------
