174Parametersnode node-id: Enables IPC performance statistics for the specified node, where node-id represents thenumber of the specified node. The value range for the node-id argument is 0 to 135.self-node: Enables IPC performance statistics for the local node.channel channel-id: Enables IPC performance statistics for the specified channel, where channel-idrepresents the channel number.Usage guidelinesWhen IPC performance statistics is disabled, the statistics data does not change. The display ipcperformance command displays the statistics collected before IPC performance statistics was disabled.Examples# Enable IPC performance statistics for channel 18 on node 6. ipc performance enable node 6 channel 18reset ipc performanceUse reset ipc performance to clear IPC performance statistics.Syntaxreset ipc performance [ node node-id | self-node ] [ channel channel-id ]ViewsUser viewDefault command level1: Monitor levelParametersnode node-id: Clears the IPC performance statistics for the specified node, where node-id represents thenumber of the specified node. The value range for the node-id argument is 0 to 135.self-node: Clears the IPC performance statistics for the local node.channel channel-id: Clears the IPC performance statistics for the specified channel, where channel-idrepresents the channel number.Usage guidelinesAfter this command is executed, the corresponding statistics will be cleared.Examples# Clear the IPC performance statistics for channel 18 on node 6. reset ipc performance node 6 channel 18PoE configuration commandsThe S7508E-X does not support PoE.
