188Examples# Display power information for PoE interfaces connected with PSE 7. display poe pse 7 interface powerInterface CurPower PeakPower MaxPower PD Description(W) (W) (W)GE1/0/25 4.4 4.5 4.6 IP Phone on Room 309 for Peter Smith....GE1/0/26 4.4 4.5 15.4 IP Phone on Room 409 for Peter PanGE1/0/27 15.0 15.3 15.4 Acess Point on Room 509 for PeterGE1/0/28 0.0 0.0 5.0 IP Phone on Room 609 for Peter John....GE1/0/29 0.0 0.0 4.0 IP Phone on Room 709 for JackGE1/0/30 0.0 0.0 5.0 IP Phone on Room 809 for Alien--- 3 port(s) on, 23.8(W) consumed, 13.2(W) Remaining ---Table 64 Command outputField DescriptionInterface Shortened form of a PoE interface.CurPower Current power of a PoE interface.PeakPower Peak power of a PoE interface.MaxPower Maximum power of a PoE interface.PD DescriptionDescription of the PD connected with a PoE interface.When the description contains more than 34characters, the first 30 characters followed by fourdots are displayed.port(s) on Number of PoE interfaces that are supplying power.consumed Power currently consumed by all PoE interfaces.Remaining Remaining power on the PSE.display poe-powerUse display poe-power to display information about external PoE power supplies.SyntaxIn standalone mode:display poe-power [ | { begin | exclude | include } regular-expression ]In IRF mode:display poe-power [ chassis chassis-number ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor level
