184display poe pseUse display poe pse to display PSE power information.Syntaxdisplay poe pse [ pse-id ] [ | { begin | exclude | include } regular-expression ]ViewsAny viewDefault command level1: Monitor levelParameterspse-id: PSE ID. To view the mapping between PSE ID and slot, use the display poe device command. Ifyou do not specify this parameter, the command displays information about all PSEs.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.Examples# In standalone mode, display information about PSE 7. display poe pse 22PSE ID : 22PSE Slot No : 7PSE SubSlot No : 0PSE Model : LSQ1GV48SAPSE Power Enabled : enabledPSE Power Preempted : noPSE Power Priority : lowPSE Current Power : 3 WPSE Average Power : 3 WPSE Peak Power : 3 WPSE Max Power : 37 WPSE Remaining Guaranteed : 37 WPSE CPLD Version : -PSE Software Version : 501PSE Hardware Version : 1PSE Legacy Detection : enabledPSE Utilization-threshold : 80PSE Pse-policy Mode : disablePSE Pd-policy Mode : disablePSE PD Disconnect Detect Mode : AC# In IRF mode, display information about PSE 7. display poe pse 7
