H3C WX5004 Installation Manual

Also see for WX5004: Configuration guide Getting started guide Installation guide Quick start guide

4-4Powering on the Access ControllerAfter the access controller is powered on, the system first initializes memory. After the initiation, thesystem runs the extended BootWare, and the following information is displayed on the terminal:System is starting...Booting Normal Extend BootWare....The Extend BootWare is self-decompressing..................Done!*************************************************************************** ** H3C WX5004 BootWare, Version 1.06 ** ***************************************************************************Copyright (c) 2004-2009 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Nov 9 2009CPU Type : XLR716CPU L1 Cache : 32KBCPU Clock Speed : 800MHzMemory Type : DDR2 SDRAMMemory Size : 2048MBMemory Speed : 533MHzBootWare Size : 512KBFlash Size : 4MBcfa0 Size : 261MBCPLD Version : 008PCB Version : Ver.ABootWare Validating...Press Ctrl+B to enter extended boot menu...Press Ctrl+B to enter the extended boot menu; otherwise, the system will start loading anddecompressing the application file.z You must press Ctrl+B in four seconds when “Press Ctrl+B to enter extended boot menu” appears.Otherwise, the system will not enter the extended boot menu but start loading and decompressingthe application file.z You need to reboot the access controller if you want to enter the extended boot menu after theapplication file is decompressed.z The extended BootWare menu is referred to as the BootWare main menu in this manual unlessotherwise specified.