5-10The current baudrate is 115200 bps===========================================================|Note:'*'indicates the current baudrate || Change The HyperTerminal's Baudrate Accordingly ||----------------------------------------------------||<1> 9600(Default) ||<2> 19200 ||<3> 38400 ||<4> 57600 ||<5> 115200* ||<0> Exit |==========================================================================Enter your choice(0-5):After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps inHyperTerminal to ensure the normal display on the console screen when the system boots or reboots.Upgrading the BootWare Through an Ethernet InterfaceEnter the BootWare main menu (refer to section “BootWare Main Menu” on page 5-4). On the BootWaremain menu, enter 7. The system will enter the BootWare operation submenu, where you can perform allBootWare operations. For details about this menu, refer to section “BootWare operation submenu” onpage 5-7.Enter 4 on the BootWare operation submenu to enter the BootWare operation Ethernet submenu:==========================================|<1> Update Full BootWare ||<2> Update Extend BootWare ||<3> Update Basic BootWare ||<4> Modify Ethernet Parameter ||<0> Exit To Main Menu |================================================================================Enter your choice(0-4):Enter 4 on the BootWare operation Ethernet submenu. The system prompts you to modify the networkparameters.========================================================|Note: '.' = Clear field. || '-' = Go to previous field. || Ctrl+D = Quit. |================================================================================Protocol (FTP or TFTP) :tftpLoad File Name :host
