H3C WX5004 Installation Manual

Also see for WX5004: Configuration guide Getting started guide Installation guide Quick start guide

5-13|<5> 115200 ||<0> Exit |================================================================================Enter your choice(0-5):Change the communication baud rate. For the detailed modification procedure, refer to section“Modifying Serial Interface Parameters” on page 5-8. After the modification, the system displays thefollowing information:Baudrate has been changed to 115200 bps.Please change the terminal's baudrate to 115200 bps, press ENTER when ready.The current baudrate is 115200 bps==============================================================|Note:'*'indicates the current baudrate || Change The HyperTerminal's Baudrate Accordingly ||------------------------------------------------------||<1> 9600(Default) ||<2> 19200 ||<3> 38400 ||<4> 57600 ||<5> 115200* ||<0> Exit |============================================================================Enter your choice(0-5):Enter 0 to return to the BootWare operation serial submenu.============================================|<1> Update Full BootWare ||<2> Update Extend BootWare ||<3> Update Basic BootWare ||<4> Modify Serial Interface Parameter ||<0> Exit To Main Menu |================================================================================Enter your choice(0-4):Enter 1 on the BootWare operation serial submenu. The system displays the following information:Please Start To Transfer File, Press To Exit.Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCSelect Transfer > Send file… on the terminal window. The following dialog box appears:Figure 5-5 Send File dialog box