5-26Password Set Successfully.z Once you enter a wrong old password or different new passwords, the password modificationoperation will fail and the system will exit this operation.z The BootWare password can consist of a maximum of 32 printable characters, such as letters,numerals, and punctuations.Super Password LossThe super password enables you to switch between four super levels. Without a super password, youcannot perform higher privilege operations.Enter 8 from the BootWare main menu to clear the super password. Then, reboot the access controller.You will directly enter system view after the access controller restarts.This setting works only once. When the access controller is restarted for a second time, the superpassword is restored.Backing Up and Restoring the BootWareUsing the BootWare MenuYou can back up and restore the BootWare on the BootWare operation submenu. After the BootWare isbacked up on a storage device, if the normal BootWare is lost, you can restore it using the backupBootWare to boot the device. Enter 7 on the BootWare main menu to enter the BootWare operationsubmenu. For details of this submenu, refer to section “BootWare operation submenu” on page 5-7.To back up the basic and extended BootWare to the CF card, enter 1 on the BootWare operationsubmenu and follow the prompts:Will you backup the Basic BootWare? [Y/N]YBegin to backup the Basic BootWare...................Done!Will you backup the Extend BootWare? [Y/N]YBegin to backup the Extend BootWare...................Done!To restore the backup BootWare from the CF card, enter 2 on the BootWare operation submenu andfollow the prompts:Will you restore the Basic BootWare? [Y/N]YBegin to restore Normal Basic BootWare...Done!Will you restore the Extend BootWare? [Y/N]YBegin to restore Normal Extend BootWare....Done!Using the CLIYou can also use bootrom commands to back up and restore the BootWare.Backing up the BootWarez Back up the complete BootWare to the Flash: