1-19channel-name: Channel name. By default, the name of channel 0 to channel 9 is (in turn) console,monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.DescriptionUse the info-center trapbuffer command to enable information output to the trap buffer.Use the undo info-center trapbuffer command to disable information output to the trap buffer.By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the defaultchannel and a maximum buffer size of 256.This command takes effect only after the information center function is enabled.Related commands: info-center enable, display info-center.Examples# Enable the system to output trap information to the trap buffer, whose size is set to 30. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center trapbuffer size 30reset logbufferSyntaxreset logbuffer [ unit unit-id ]ViewUser viewParametersunit-id: Unit ID of the device.DescriptionUse the reset logbuffer command to clear information recorded in the log buffer.Examples# Clear information recorded in the log buffer. reset logbufferreset trapbufferSyntaxreset trapbuffer [ unit unit-id ]ViewUser viewParametersunit-id: Unit ID of the device.
