2-4Table 2-3 display rmon eventlog command output descriptionField DescriptionEvent table Index of an entry in the RMON event tableVALID The status of the entry identified by the index isvalid.Generates eventLog 1.1 at 0days 00h:02m:27sTime when the event is triggered. The event canbe triggered for multiple times. 1.1 indicates thetime when event 1 is first triggered.Description Description of the RMON event logThe above output indicates that two logs are generated due to event 1:z Log 1.1 is generated from alarm entry 1, because the sampled value (0) of the alarm entry is lowerthan the falling threshold (100). The sampling type is absolute.z Log 1.1 is generated from prialarm entry 1, because the sampled value (0) of the prialarm entry islower than the falling threshold (100). The sampling type is absolute.display rmon historySyntaxdisplay rmon history [ interface-type interface-number | unit unit-number ]ViewAny viewParametersinterface-type: Interface type.interface-number: Interface number.unit unit-number: Specifies a unit number.DescriptionUse the display rmon history command to display the RMON history information about a specifiedport. The information about the latest sample, including bandwidth utilization, the number of errors, thetotal number of packets, and so on, is also displayed.After a history entry is created on a port, the system collects statistics of the port at a certain interval,and saves the information in the etherHistoryEntry table. You can use the command to display therecords saved in the table.If you do not provide the interface-type interface-number or unit-number argument, this commanddisplays the RMON history information about all the ports/units.Related commands: rmon history.Examples# Display the RMON history information about Ethernet 1/0/1. display rmon history Ethernet 1/0/1History control entry 1 owned by user1 is VALIDSamples interface : Ethernet1/0/1
